Tag Archives: survey

Thank you so much…. for the feedback

Hello Friends ,

Good afternoon.

Long time we have not done any introspection . Right ?

Do you know that these page views , 270079 , represent viewers of 188  countries ?

This is the paero chart for your quick view :

10

The entire list of 188 countries is so long that it shall be difficult to view it in a single glance. ]

Some time back , we had requested the viewers to take a survey about various features of this blog. The results are very encouraging .

Thank you so much for taking out your precious time and giving us the feed back about the blog.

Thought , you would like to know about the survey results.

Let me present you the survey report here :

4

3

1

5

Thank you so much once again and let me assure that we shall always ensure that this blog  shall always help you towards achieving your goals in your career.

Bye Bye

 

 

Advertisements

How to do Contour Survey ?

Dear Readers ,

Good Afternoon !

The week end is almost here and you must be planning for a great enjoyment .Right ?

We also have an occasion to celebrate. Our followers strength has just crossed the 600 mark. Thank you so much for your overwhelming response.

You people always provide me inspiration to continually upgrade the quality of the posts here. It is my endeavour to give you new insights every time we meet here.

You know what ?

This document has been just released :

nbrb

You shall like to have a copy of this informative document ?

Remember to start following  this blog before you send us this form.

Please mention ” NBRB Rev 01 Dated 21.10.2016 ” in the comment section :

1

2

3

4

5

6

7

Now look at this plan.

the reduced levels on the various nodes on the grid have been mentioned.

We shall be now drawing the longitudinal profile of the land on the axis C-C.

8

9

If we go for the option Z , It shall be complete cutting. option X is complete filling. Whereas the option Y is partial cutting and partial filling.

11

10

Now let us calculate the volume of cutting and filling on Axis C-C for the Option Y :

12

13

 

WHAT ? MATERIAL FOR PLASTER ?

Dear Friends ,

Good evening .

Now let us understand the steps involved in calculating the Plaster area and let us learn to find out the materials for plaster.

This is the sketch :

1

Let us jot down the objectives :

2

Now let us clarify various assumptions for this exercise.

3

IMG_20160430_103606

Now let us calculate in various steps as follows ;

4

IMG_20160430_105629

5

IMG_20160430_104032

6

IMG_20160430_104055

7

IMG_20160430_104401

8

IMG_20160430_105713

9

10

11

IMG_20160430_104921

12

IMG_20160430_104837

Hope you have understood the steps correctly.

bye friends.

 

How many Acres in a SqFt ?

Friends ,

Thank you so much for your regular visits to this blog.

32

Oh , don’t worry about the title.

It was just to draw your attention.

We measured a plot quite recently.

IMG_20160220_165230.jpg

Let me show you the actual plot first.

IMG_20160226_162806

This was a rectangular plot so measurement was not a special issue.

The plot area as we measured , came out to be 273.7 SqM.

Now we wanted to convert this area into various other units such as in                                         Metric [ ARE , HECTARE ] and British [ SQFT.,SQ.YARD ( Known as as VAR ) ,GUNTHA & ACRES ].

This is how we went about :

26

This is how the calculations appeared :

METRIC UNITS :

27

BRITISH UNITS :

29

we concluded with the remaining units :

30

Hope you have followed the steps.

This way you can also convert any given area into various units as per the need.

IMG_20160226_165833

This is the performance of this blog so far.

Thanks for your continued support.

33